Ochre Flame No. 23 Lacquer

Ochre Flame No. 23 sits somewhere between sun-warmed clay, brick dust and a saffron field: a warm, burnt ochre with a distinct earthy undertone. It belongs to the red family without ever quite becoming red. On a piece of furniture, it's the touch of warmth that an otherwise cool room is missing.

What carries this ochre tone

It's the earthy undertone that gives this colour its depth. Applied in a silky sheen, it takes on a rich, dense depth that stays warm and calm in daylight, while shifting noticeably towards red under artificial light. On large surfaces it reads bold but never loud, since it has no harshness to it. On wooden furniture it picks up the existing warmth; on light-coloured panels it stands out more crisp and graphic. The gentle sheen traces edges, handle grooves and frames – a detail that makes a real difference on older furniture.

Preparation and build-up in two coats

Bold shades forgive little, which is why the groundwork matters. The surface must be clean, dry, stable and free of any loose material. Old lacquered surfaces should be sanded to a matte finish, with all sanding dust fully removed. Then follows a fixed build-up: re-box core primer as the bonding base, followed by the lacquer. core is designed for strong adhesion on a wide range of surfaces. In most cases, the room is back to normal use after about 24 hours. If you want clean, sharp lines around edges and glazing bars, read How to tape correctly without paint bleeding underneath first.

Where this ochre tone belongs

Painting is done with re-box protect. This silky-sheen furniture and accent lacquer is made for furniture, wood and interior surfaces, and stands up to mechanical wear, everyday marks and external influences.

• Kitchen fronts and shelves that bring warmth into the room
• A single interior door as a colour accent in a white hallway
• Wooden chairs, stools and table frames
• Wall panels, built-ins and interior windowsills

For a kitchen project with a timeline and quantity plan, see Painting a kitchen: guide, costs, colour.

How much you'll need for your project

One tin holds 750 ml. With a guide value of approx. 6 to 8 m² per litre and coat, that works out to approx. 4.5 to 6 m² for one coat, or approx. 2 to 3 m² for two coats. That's enough for four kitchen chairs, a shelf or a chest of drawers; for an interior door painted on both sides, including the frame, it's best to plan for two tins. On dark, strongly coloured or uneven surfaces, consumption can be higher.

Combinations that go with ochre

Ochre Flame likes to sit alongside tones from the same warm family. Pimento Glow No. 34 Lacquer leans more strongly towards red, Crimson Éclat No. 43 Lacquer sets a deep final note. Things soften with Château Rose No. 38 Lacquer, and turn calm and light with Linen Wash No. 2 Lacquer for carcasses and interiors. The full overview is under Red lacquer colours. For the wall in the same shade: Ochre Flame No. 23 as a wall paint, matte or satin-matte.

Frequently asked questions about Ochre Flame No. 23

Is the tone more orange or more red?
It's a warm ochre with an earthy core that shifts towards red under artificial light. In daylight it appears calmer and more yellow.

What goes underneath the lacquer?
re-box core as the bonding base, then the lacquer. On smooth or previously lacquered surfaces, this step is essential for proper adhesion.

Is 750 ml enough for four chairs?
Usually yes, based on approx. 2 to 3 m² for two coats. Turned legs and spindles need a little more than flat surfaces.

Can I return the colour?
No, mixed colours are excluded from withdrawal and exchange. Each shade is mixed only after the order is placed, so it's worth ordering a sample beforehand.